Frequently Asked Questions

The GNS3000 normally output GPS Data with 1Hz. You can configure the output frequency to 4Hz by using our lab firmware 1.3.1. Please visit to our support side https://www.gns-electronics.de/support-gns3000/  for downloading the "How to" and the firmware
The GNS 3000 is not using internal memory for logging data. If you want to log data you need an SD Card.
Hello, you can find the Windows logger Tool for GNS2000, GNS2000plus please go to Support & Training Tab Product Resources and search 2000 The System will list all files regarding the GNS2000 for downloading or direct download https://www.gns-electronics.de/wp-content/uploads/2019/12/GNS2000Track.zip regards Support GNS Electronics
HULC-M is tested and works fine with WINDOWS PC: a) Planeplotter Planeplotter b) Virtual Radar Server Virtual Radar Server c) adsbscope ADS-B Scope MAC: a) Planefinder Planefinder Raspberry: a) Planefinder Planefinder b) dump1090 should work but depends on the build you are using. Generally you need a Beast configuration over USB with 921600 baud
The internal battery of the GNS3000 is not changeable. Normally the battery has a very long lifetime. If you have an defect or the battery is broken you can send your device to our support. They will change the battery and your device will be resended within one week.
die Loggingzeit ist intern fix auf 5 sek festgelegt.
Diese Einstellung ist nicht dafür vorgesehen, durch den Kunden verändert zu werden.  
Question: Hello, Do the GNS3000 switch off during logging after 15 min. not connected to Bluetooth and power ? Answer: During logging GNS3000 switch off the automatic power off system Automatic power off is only enabled under following conditions: a) no power connection and b) no active bluetooth connection and c) no active logging  
Notes on GNS3000 Power Management
Operational limits are: dynamics:  < 4 g altitude: < 18.000 m speed: < 515 m/s
The accuracy is 2.5m CEP SBAS/GPS/GNSS